300W COB Type Spotlight for Wedding
Rated voltage: AC100-240V, 50/60Hz
Rated power: 320W Light source: COB300W
Light source life: more than 50,000 hours
Color rendering index: Ra≥95
Special CRI: R9≥90, R15≥90
Color temperature: 5600K, pure beam without noise and shadows, rich saturated colors and soft tones
Dimming: 0~100% linear dimming, perfect dimming system without color change from 0 to 100%.
Control panel: LCD liquid crystal display + four buttons
Optics: Special combination lens for imaging lamp, 10°/19°/26°/36°/50° (optional)
Four built-in shading sheets can easily cut out various shapes, 24K flicker-free light source management system
Cooling method: copper tube radiator + intelligent silent fan cooling system
Temperature monitoring: built-in temperature protection sensor, over-temperature protection by automatically adjusting the lamp power,
The display panel can check the working temperature of the lamp in real time.
Control mode: DMX512 control/manual mode Channel mode: 1CH/2CH
Protection class: IP20
Accessories: power cable, signal cable, pattern clip (optional)
Lamp body net weight: 6kg
Lamp body size: 615*280*215MM
Feature
- Use 300W LED high brightness COB LED.
- Even brightness and no flash.
- Adapted high strength aluminum alloy for housing.
- Great cooling system, reduce light failure longer life time.
- Suitable for stage, theater, disco, church, hotel etc
Installation:
- When installation, keep the device far away the heat sensitive objects and explosives sensitive objects, leave at least 50CM of free space around the device.
- When the device put on horizontal place, the device must be placed directly on the place, and device must be secured with a mounting holder.3.
- When rigging the devices on the truss and the head face to the floor. Screw one clamp each via a M12 screw and nut onto the mounting holder. Insert the quick-lock fasteners of the first mounting holder into the respective holes on the bottom of the device. Tighten the quick-lock fasteners fully clockwise. Install the second mounting holder. And the safety rope must be used at same time
- Please use qualified safety-rope, which can hold at lease 10 times the weight of the fixture. You must only use safety-ropes with quick links with screw cap. Pull the safety-rope through the hole on the bottom of the base and over the trussing system etc. Insert the end in the quick link and tighten the fixation screw. A safety rope which already hold the strain of a crash or which is defective must not be used again.
Audited Supplier 
){kind=link}