Main Menu |
Submenu |
Menu Function Description |
1. System settings 2. Operating mode 3. Manual control Main Menu |
1. DMX Address |
Modify the DMX address code up or down (the address code can be selected from 001-512), and press OK to save it. The default is 001. |
2. Encoder |
Modify the encoder on/off upward or downward, and save the confirmation key, which is on by default. |
3. X Reverse |
Modify X up or down to turn it on/off. Press OK to save it. It is off by default. |
4. Y Reverse |
Modify Y upward or downward to turn it on/off. Press OK to save. It is closed by default. |
1. System settings 2. Operating mode |
1. Operating mode |
Select up or down the operation mode DMX/voice control/auto, confirm to save, default DMX. |
2. Channel selection |
Select channels CH33, CH53, CH69, CH105 up or down, and press OK to save. The default is CH33. |
3. Manual control |
1. X axis |
Modify the operating parameter value of X motor up or down (adjustable range 000-255), and press OK to save it. The default value is 000. |
2. X Rotation |
Modify the X rotation parameter value up or down (adjustable range 000-255), and press OK to save. The default value is 000. |
3. X axis fine adjustment |
Modify the operating parameter value of the X fine tuning motor up or down (adjustable range 000-255), and save the confirmation key. The default value is 128. |
4. Y axis |
Modify the Y axis parameter value up or down (adjustable range 000-255), and press OK to save. The default value is 128. |
5. Y Rotation |
Modify Y rotation parameter value up or down (adjustable range 000-255), and press OK to save. The default value is 000. |
6. Y-axis fine adjustment |
Modify Y fine-tuning parameter value up or down (adjustable range 000-255), and press OK to save. The default value is 000. |
7. XY speed |
Modify the XY speed parameter value up or down (adjustable range 000-255), and press OK to save. The default value is 000. |
8. Focusing |
Modify the focusing value up or down (adjustable range 000-255), and press the OK key to save. The default is 000. |
9. General dimming |
Modify the total dimming value up or down (adjustable range 000-255), and press OK to save. The default value is 255. |
10. A Dimming |
Modify the dimming value up or down (adjustable range 000-255), and press OK to save. The default value is 255. |
11. A Strobe |
Modify the stroboscopic value up or down (adjustable range 000-255), and press OK to save. The default value is 000. |
12. A Red |
Modify the brightness of the red lamp bead up or down (adjustable range 000-255), and press OK to save. The default value is 255. |
13. A Green |
Modify the brightness of the green lamp bead up or down (adjustable range 000-255), and press OK to save. The default value is 255. |
14. A Blue |
Modify the brightness of the blue lamp bead up or down (adjustable range 000-255), and press OK to save. The default value is 255. |
15. A White |
Modify the brightness of white lamp beads up or down (adjustable range 000-255), and press OK to save. The default value is 255. |
16. Mode A |
Modify the mode parameter value up or down (adjustable range 000-255), and press OK to save. The default value is 000. |
17. A Speed |
Modify the speed parameter value up or down (adjustable range 000-255), and press OK to save. The default value is 000. |
18. A Background color |
Modify the background color parameter value up or down (adjustable range 000-255), and press OK to save. The default value is 000. |
19. A Background tone light |
Modify the background tone light parameter value up or down (adjustable range 000-255), and press OK to save. The default value is 000. |
20. B Dimming |
Modify the dimming value up or down (adjustable range 000-255), and press OK to save. The default value is 255. |
21. B stroboscopic |
Modify the stroboscopic value up or down (adjustable range 000-255), and press OK to save. The default value is 000. |
22. Mode B |
Modify the mode parameter value up or down (adjustable range 000-255), and press OK to save. The default value is 000. |
23. Speed B |
Modify the speed parameter value up or down (adjustable range 000-255), and press OK to save. The default value is 000. |
24. C dimming |
Modify the dimming value up or down (adjustable range 000-255), and press OK to save. The default value is 255. |
25. C stroboscopic |
Modify the stroboscopic value up or down (adjustable range 000-255), and press OK to save. The default value is 000. |
26. C red |
Modify the brightness of the red lamp bead up or down (adjustable range 000-255), and press OK to save. The default value is 255. |
27. C green |
Modify the brightness of the green lamp bead up or down (adjustable range 000-255), and press OK to save. The default value is 255. |
28. C Blue |
Modify the brightness of the blue lamp bead up or down (adjustable range 000-255), and press OK to save. The default value is 255. |
29. Mode C |
Modify the mode parameter value up or down (adjustable range 000-255), and press OK to save. The default value is 000. |
30. C speed |
Modify the speed parameter value up or down (adjustable range 000-255), and press OK to save. The default value is 000. |
31. C background color |
Modify the background color parameter value up or down (adjustable range 000-255), and press OK to save. The default value is 000. |
32. C background tone light |
Modify the background tone light parameter value up or down (adjustable range 000-255), and press OK to save. The default value is 000. |
33,reset |
When the parameter value is 150-255, the whole machine is reset. The console parameter value must be pulled below 10 and then pushed to 150-255 to be useful. When the parameter value is 000-149, it is useless and cannot be reset. |
- Display Settings
|
1. Language selection |
Select Chinese/EN (English) up or down, and click OK to save. The default is Chinese. |
2. Invert Settings |
Select up or down to close/open the inverted display setting, and press OK to save it. It is closed by default. |
3. Screen saver |
Select Close/Open the screen saver up or down, and press the Enter key to save it. It is enabled by default. |
4. Software version |
06XA program ID, which cannot be modified. |
- Factory Settings
|
Please enter password for display! Change it up or down to 138, and then press the OK key to enter the factory setting. |
1. X axis calibration |
Modify the parameters up or down (range 000-255), and press OK to save. The default value is 128. |
2. Y-axis calibration |
Modify the parameters up or down (range 000-255), and press OK to save. The default value is 128. |
2. X-axis non-polar |
Modify X stepless parameter up or down (range 000-255), and press OK to save. The default value is 128. |
2. Y-axis non-polar |
Modify Y stepless parameter up or down (range 000-255), and press OK to save. The default value is 128. |
3. Focus calibration |
Modify the parameters up or down (range 000-255), and press OK to save. The default value is 128. |
2. Focus stroke |
Modify the parameters up or down (range 000-255), and press OK to save. The default value is 128. |
5. Red |
Modify the red lamp bead current (032-255) upward or downward, and press OK to save. The default is 252. |
6. Green |
Modify the green lamp bead current (032-255) upward or downward, and press OK to save. The default is 252. |
7. Blue |
Modify the blue lamp bead current (032-255) upward or downward, and press OK to save. The default is 252. |
8. White |
Modify the white lamp bead current (032-255) upward or downward, and press OK to save. The default is 252. |
2. White 3W |
Modify the white 3W lamp bead current (032-255) upward or downward, and press OK to save. The default is 252. |
9. X-axis speed |
Modify the X speed parameter up or down (range 000-255), and press OK to save. The default is 116. |
2. Y-axis speed |
Modify Y speed parameter up or down (range 000-255), and press OK to save. The default is 128. |
2,Logo |
Select 000/001 up or down, and press OK to save. The default is 000. |
2. Temperature |
Modify the temperature parameters up or down (range 40-70), and press OK to save. The default is 060. |
2. Temperature - Fan |
Select the off/on temperature fan control upward or downward, and press the OK key to save it. It is off by default. |
2,LED |
LED selection default LEDA |
10. Current |
Select 000/007 up or down, and press OK to save. The default is 000. |
11,Logo |
Select 000/001 up or down, and press OK to save. The default is 000. |
12. Temperature |
Modify the temperature parameters up or down (range 40-70), and press OK to save. The default is 065. |
13. Temperature - Fan |
Select the off/on temperature fan control upward or downward, and the confirmation key is saved. The default is on. |